Fiberglass and Natural Fiber Sheet Thermoforming Machine, This machine performs thermoforming of composite sheets made of fiberglass or natural fibers (NFPP, hemp, kenaf, jute, etc.). The process is: Sheet Heating The fiberglass or natural‑fiber composite sheet is heated until it reaches its thermoforming temperature (typically 160–220 °C depending on resin content). Transfer to Mold The softened sheet is transferred into a heated forming mold using a shuttle, robot arm, or manual loading. Forming / Pressing The mold closes and applies pressure, shaping the sheet into the final geometry. This step defines: thickness distribution surface finish structural stiffness Cooling & Stabilization The part cools inside the mold until it becomes dimensionally stable. Demolding The formed composite part is removed and sent to trimming, machining, or assembly. Industrial use: automotive interior panels, trunk liners, door panels, semi‑structural co...
One (1) New, Substation Transformer 120 MVA, 230/34.5/13.8 kV. 60 Hz. 3 Phase INSULATION LEVEL (BILL) HV Line WDG / BUSHING: 750/900 KV HV Neutral WDG / BUSHING: 200/200 KV LV Line WDG / BUSHING: 200/250KV LV Neutral WDG / BUSHING: 200/200KV STANDARDS: IEEE C57.12.00 - 2015 Frequency: 60 Hz. Vector Group: YNyn0+d1 Oil Preservation system: Conservator Insulation Oil: Type II Mineral Oil Rated voltage (volts): 230 000 GrdY/132 790 - 34 500 GrdY/19 919 -13 800D Manufacturing Year: 2022 Warranty expiration Date: April, 2031