Fiberglass and Natural Fiber Sheet Thermoforming Machine, This machine performs thermoforming of composite sheets made of fiberglass or natural fibers (NFPP, hemp, kenaf, jute, etc.). The process is: Sheet Heating The fiberglass or natural‑fiber composite sheet is heated until it reaches its thermoforming temperature (typically 160–220 °C depending on resin content). Transfer to Mold The softened sheet is transferred into a heated forming mold using a shuttle, robot arm, or manual loading. Forming / Pressing The mold closes and applies pressure, shaping the sheet into the final geometry. This step defines: thickness distribution surface finish structural stiffness Cooling & Stabilization The part cools inside the mold until it becomes dimensionally stable. Demolding The formed composite part is removed and sent to trimming, machining, or assembly. Industrial use: automotive interior panels, trunk liners, door panels, semi‑structural co...
. 2500 HP Electric, Ariel KBK/4 Compressors – Capacity ~12MMSCFD @ 40# sucti on / 900# discharge – (3 Units) (3) coolers for these units are currently located in at Alfa Laval (manufacturer of the coolers) maintenance has been performed by UEC on the units. (1) MCC Building - (1) VFD, sync transfer control and MV MCC with PFCC for 4 units (1) Virginia 12.47 kV to 4160/2402 V, 12000//22400 KVA Power Transformer with 400A NGR to support these units.