Fiberglass and Natural Fiber Sheet Thermoforming Machine, This machine performs thermoforming of composite sheets made of fiberglass or natural fibers (NFPP, hemp, kenaf, jute, etc.). The process is: Sheet Heating The fiberglass or natural‑fiber composite sheet is heated until it reaches its thermoforming temperature (typically 160–220 °C depending on resin content). Transfer to Mold The softened sheet is transferred into a heated forming mold using a shuttle, robot arm, or manual loading. Forming / Pressing The mold closes and applies pressure, shaping the sheet into the final geometry. This step defines: thickness distribution surface finish structural stiffness Cooling & Stabilization The part cools inside the mold until it becomes dimensionally stable. Demolding The formed composite part is removed and sent to trimming, machining, or assembly. Industrial use: automotive interior panels, trunk liners, door panels, semi‑structural co...
- Cummins KTA34 G4 Enclosed Diesel Generator Set.
- New/Surplus CHP MWN 800 kW, 400v. 50 Hz Natural Gas
- Two (2) Quality Used Solar Mars 100 Wartsila, Natural Gas Turbine Generators
- Natural Gas Compressor CAT + Ariel 5000 PSI, 10 MMSCFD
- Caterpillar G3520H, 2500 kW, 400v. 50 Hz
- Caterpillar G3516H, 2000 kW, 400v. 50 Hz
- Surplus 3512B Land Drill Module, 1200 kW, 600v. 50 Hz
- Surplus 3512C Land Drill Module, 1045 kW, 600v. 60 Hz
- Two (2) Mobile 30 MVA, 115/13.8 kV. 60 Hz. Substation
- Complete
Rebuilt Caterpillar G3616 Natural Gas Engine
- FOUR (4) FULLY REFURBISHED SOLAR TAURUS 60, 5200 Kw, 50 HZ. Quality Use Solar Taurus 65 Natural Gas Turbine-Generator Set
- CATERPILLAR CG170-20, 2000 kW, 400v. 50 Hz
- CUMMINS/AGGREKO Osprey, Model NHC20-QSK60G22, 1875 kVA, 480v. 60 Hz
- SURPLUS-NEVER USED-NEVER INSTALLED, Five (5)
- Caterpillar 16CM32C, 7370 kW, 11,000v. 60 Hz. Marine Diesel-HFO-Generator Set
Comments
Post a Comment