Fiberglass and Natural Fiber Sheet Thermoforming Machine, This machine performs thermoforming of composite sheets made of fiberglass or natural fibers (NFPP, hemp, kenaf, jute, etc.). The process is: Sheet Heating The fiberglass or natural‑fiber composite sheet is heated until it reaches its thermoforming temperature (typically 160–220 °C depending on resin content). Transfer to Mold The softened sheet is transferred into a heated forming mold using a shuttle, robot arm, or manual loading. Forming / Pressing The mold closes and applies pressure, shaping the sheet into the final geometry. This step defines: thickness distribution surface finish structural stiffness Cooling & Stabilization The part cools inside the mold until it becomes dimensionally stable. Demolding The formed composite part is removed and sent to trimming, machining, or assembly. Industrial use: automotive interior panels, trunk liners, door panels, semi‑structural co...
QUALITY USE, TAURUS 65 8401S NATURAL GAS TURBINE GENERATOR
Solar Taurus 65 with SoLoNox Natural Gas Turbine, 6.3 MW, 6300 v. 50 Hz. with a Leroy Somer Generator. Year of Manufacturing 2011. Unit was rebuilt in 2022 with the replacement of the Turbine and gear box. The number of hours since rebuilt is approximately 2500 hours.
Scope of supply includes: Control System, Gas Train, Oil System, Refrigeration System, Gas Compressor, Air Filter, Air Inlet Conduct and Gas Tank.
Unit is now ready for shipment. Borescope reports of the gear box and the turbine are available.




Comments
Post a Comment