Fiberglass and Natural Fiber Sheet Thermoforming Machine, This machine performs thermoforming of composite sheets made of fiberglass or natural fibers (NFPP, hemp, kenaf, jute, etc.). The process is: Sheet Heating The fiberglass or natural‑fiber composite sheet is heated until it reaches its thermoforming temperature (typically 160–220 °C depending on resin content). Transfer to Mold The softened sheet is transferred into a heated forming mold using a shuttle, robot arm, or manual loading. Forming / Pressing The mold closes and applies pressure, shaping the sheet into the final geometry. This step defines: thickness distribution surface finish structural stiffness Cooling & Stabilization The part cools inside the mold until it becomes dimensionally stable. Demolding The formed composite part is removed and sent to trimming, machining, or assembly. Industrial use: automotive interior panels, trunk liners, door panels, semi‑structural co...
CAT 3512B Land Drill Module, 1714 kVA (1200 kW), 600v. 50 Hz. Diesel Generator Set Open Skids.
SURPLUS/NEVER USED, Caterpillar 3512B, Land Drill Module, 1714 kVA, 600v. 50 Hz. Diesel Generator Set with the following configuration:
Heavy Duty Air Cleaner, Fuel Filter & Prime Pump, Simplex Oil Filter, Charging Alternator, Electric Starter, Jacket Water Heater, EMCP Panel, Generator Frame 826, 2 bearing, 1500 RPM, 14” Spark Arrester Muffler, Y Adapter 8” X 14”, Radiator 46/CVD 0.52 Ratio




Comments
Post a Comment